Sirius Satellite Radio 5 manual Optimize the placement of the FEA

Step 7: Optimize the placement of the FEA

1.Mute the volume of your Sportster SP5. The easiest way to do this is to use the MUTE button on the remote control (see pages 67 – 68). Note, your SIRIUS radio is still ON.

2.Turn up the volume of your vehicle’s FM radio. If you hear static or interference adjust the position of the FEA until the static or interference is eliminated or minimized (see Figure 42).

Figure 42

3.If the level of static or interference is still high, please select another FM channel by repeating Steps 5 & 6, on pages 56 – 57.

Step 8: Permanently install the FEA

Note: If you are mounting the FEA in the vehicle’s headliner, skip this step.

When you are satisfi ed with the FEA’s mounting location, remove the suction cup mounts and peel the backing off the bead and arrow adhesive mounts. Clean the area where the FEA will be attached with the alcohol swab. Permanently adhere the FEA in the same position on the glass (or A-pillar), making certain the wire is taut and is as straight as possible (see Figure 43). If necessary, use the cable guides to hold the cable.

REMOVE	REMOVE	REMOVE
ADHESIVE BACKING	BOTH SUCTION CUPS	ADHESIVE BACKING
FROM ARROW		FROM BEAD
THIS THINNER PORTION OF THE FEA		USE THE CABLE GUIDES TO HOLD THE CABLE
SHOULD BE TAUT WHEN THE FEA		IN POSITION UNTIL IT REACHES
	IS PERMANENTLY ADHERED	THE INNER TRIM OR MOULDING

Figure 43

[ Installation ] 59