Sirius Satellite Radio 5

[ Menu Options ]

JUMP SETTINGS

You can access the JUMP SETTINGS menu from the MENU OPTIONS > SETTINGS screens, or by

pressing and holding the JUMP button for 1½ seconds.

There are two options available for jump button settings: TRAFFIC AND CHANNEL (see

Figure 83, left). The currently-selected option is indicated by the check-mark.

Setting the Jump Button to Traffic

To set the jump button to jump to traffic reports:

Select the JUMP TO TRAFFIC option (see Figure 83, left). The TRAFFIC screen will

appear (see Figure 83, right).

Select the city for which you would like to hear traffic reports. (To exit this menu

without changing your current city selection, press the MENU button 3 times).

Note: If the channel list has not yet been downloaded from the SIRIUS data stream,

an UPDATING CITY LIST notification screen will be displayed. Wait 10 minutes and then try

selecting a city again.

Setting the Jump Button to a Channel

To set the JUMP button to any channel other than a traffic channel:

Select the JUMP TO CHANNEL option (see Figure 83, left).

Press the MENU button to exit the MENU OPTIONS and return to the Default display

screen. You can now program the JUMP button by tuning to your desired channel

and pressing and holding the JUMP button for 1½ seconds, as described in the

Jump Button section on page 79.

Figure 83