[ Operation ]
84
If all of the memory spaces are full when you press the MEMO button, a MEMORY FULL
screen will be displayed for one second (see Figure 66).
A REPLACE–CANCEL screen will then be displayed (see Figure 67).
Turn the Knob (on the remote, use the Channel UP/DOWN buttons) to highlight whether to
replace an existing alert or cancel saving the alert to memory, and press the Select button.
If you chose to cancel saving the alert, the SP5 will revert to the last active display mode.
If you chose to replace an existing alert, a listing of all the alerts stored in memory will be
displayed (see Figure 68).
Figure 66
Figure 67
Figure 68