[ Operation ] 79
Turning the Knob will cycle through all of the stored presets by preset bank and number
(for example, A1, A2...B1, B2...C1,C2...). Continuing to turn the Knob after the last
stored preset is displayed will return back to the first stored preset.
To exit the MY PRESETS screen and return to Default display screen, press and hold the
BAND button for 1½ seconds.
Jump Button
Your SIRIUS Sportster SP5 features a special button
called Jump. This button can be programmed to jump to
a channel which is accessed frequently and temporarily
such as traffic, weather, news, or sports. The JUMP but-
ton lets you quickly tune to a specific channel and then
tune back to the original channel by pressing the button
again (see Figure 59).
Refer to Jump SETTINGS on page 98 for information on
configuring the JUMP button.
If the Jump button is set to Traffic, pressing the Jump
button will take you to your stored traffic channel. If
your traffic report is not immediately available, the Band
indicator on the display will change to the Jump icon to
indicate a jump is active. Once your local traffic report
is ready, the radio will automatically tune to your stored
traffic channel. You may have to wait a few minutes for
your desired report.
Pressing the Jump button while the radio is searching
will cancel the search. Pressing the Jump button after
the radio has tuned to your traffic report will return to
the channel to which you had been listening immedi-
ately prior to pressing the Jump button. Figure 59