Sirius Satellite Radio Model Satellite owner manual Getting Started

Packed with your Model Satellite radio you should find:

•1 External FM Antenna

•1 External Sirius Antenna

•1 External AM Loop Antenna

•1 External Power Supply

•1 Remote Control with Battery

•1 Warranty Registration Card

Please contact your dealer or Tivoli Audio if any of these items are missing.

GETTING STARTED:

1.Connect the Sirius antenna to the rear Sirius antenna input.

2.Connect the external power supply and plug it into an outlet.

3.Be sure the front source knob is in the Sirius position and press and hold the Power button to turn the unit on.

4.Position the Sirius antenna for best signal reception. See section marked “Sirius Reception”.

5.Activate your Sirius subscription.

ATTENTION: “NO SIGNAL. PUSH ENTER BUTTON IN SIRIUS MODE” The display will show this message when the power supply is connected to the Model Satellite for the first time, when the power supply is disconnected and re-connected from the unit, or after a power failure. In such cases, be sure the source knob is in the Sirius position and the Sirius antenna is properly connected. Press and hold the Enter button to turn the Model Satellite on to re-acquire the signal.

Activating your Sirius Radio Subscription

You will quickly be able to enjoy the multitude of Sirius channels once you activate your subscription by following these three easy steps:

1)Once you’ve connected the Sirius antenna and power supply, the LCD screen will show: “No Signal. Press Enter Button in Sirius Mode”. Verify that the source knob is set in the SIRIUS position. Press and hold the red Power/Enter button until the unit turns on. The display will initially show “Acquiring Signal”, then “Updating Channels”, and will then show “To Activate Call 1-888-539-7474” if the signal is received. Adjust the volume control. You should be hearing the Preview Channel. This is the only channel you will receive until your subscription is activated.

If not, point the remote control at the unit, press the Direct button on the remote control, followed by the numbers “1-8-4”. You should now hear the preview channel. If you still do not hear anything, re-orient the Sirius antenna until you do. For more, see the section marked “Reception”.

2)Now press the Menu button. Sirius ID will be highlighted in the Main Menu. Press the Enter button to view your unit’s unique 12-digit ID number on the display. Record this number and have a valid credit card available when you contact Sirius at 1-888-539-7474 to activate your subscription, or log on to: www.siriusradio.com

5