Activating the Song (S-Seek) Alert
1.Press and hold the MEMO button for 3 seconds to enter the S-Seek Mode.
2.Press and release SELECT. A pop-up screen displaying two selectable options - “Delete” and “S-Seek”will appear (below left).
3.Use the Channel Switch to highlight the “S-Seek”option.
4.Press and release SELECT and an S-Seek confirmation screen will appear. Select the “Yes” option using the Channel Switch and press SELECT to confirm (below right).
Memory Recall | | S-Seek |
Delete | | On |
| | |
S-Seek | | Off |
| | |
With the S-Seek option enabled, whenever the Streamer GT Receiver is turned on, it automatically searches the incoming channels to determine if a match exists with the program information stored in receiver’s memory. If one or more matches are found, a pop-up screen momentarily appears for 2- seconds and displays “S-Seek Alert”. An audible
beep tone will be heard indicating that a match has been found. The display then reverts to the S-Seek Alert screen which displays the current matches. You can now select the Artist/Song Title or game that you wish to listen to. No stored match alert is provided for the currently selected channel. To ensure that no duplicate entries are stored in memory, the Receiver will check the stored input data to ensure the information about to be stored is not already in memory.
•If one or more matches are found, a list appears. You can scroll through the list and select a program using the Channel Switch. Your selection will be tuned and the display will revert to the last active display mode.
•If a selection is not chosen within 10 seconds, the screen will revert to the last active display and
tuning modes.
NOTE: Play of the current selection will continue until a new selection is made.
001 CH NAME 12:00P A | | S-Seek Alert |
| | | | |
| | | | Artist Name/Song |
| S-Seek Alert | |
| | | Artist Name/Song |
| | | |
| | | | |
