Vehicle Installation: Mounting the Antenna

1.Temporarily plug the antenna into the “ANTENNA” connector on Sirius Starmate until it is firmly seated.

2.Find a location on a metal surface of your vehicle at least 12" x 12", and at least 6" from a window.

3.The antenna’s powerful magnet will secure it to the metal surface. Before routing the antenna cable, confirm that the antenna is mounted in a good location.

4.Temporarily plug the Vehicle Power Adapter into the cigarette lighter.

5.Press and hold the POWER button to turn the ST1 Receiver on.

6.If your ST1 Receiver has been properly connected and the antenna is receiving the SIRIUS signal you will hear audio. If you do not hear audio and the display shows “Acquiring Signal”, reposition the antenna until the message goes away and you hear audio. (See Antenna Signal, on page 21 of the ST1 Receiver manual to use the ANTENNA SIGNAL screen to aim the antenna.)

Make sure the vehicle is not in a garage or somewhere the satellite signal could be blocked.

Best reception is achieved with the antenna mounted on the roof or the trunk for convertibles.

If the vehicle has a roof rack or skid ribs, it may be necessary to mount the antenna off-center.

12

Starmate ST1 User Guide

Page 12
Image 12
Sirius Satellite Radio ST1 manual Vehicle Installation Mounting the Antenna