Factory Default
This Menu option will restore all original factory settings. To activate this feature, perform the following procedure while in the “Menu Options” List Mode:
1.Use the Channel Switch to highlight the “Factory Default” option. Press SELECT. “Restore Settings” will pop up on the Receiver’s display.
2.Use the Channel Switch to select “Yes” to restore all settings to the settings from the factory or select “No” to leave them
Restore Settings
Yes
No
If “Yes” is chosen, the unit reverts to the original factory settings for the following parameters:
•All Presets revert to empty
•Auto Dimming On
•Display Contrast to 50%
•Display Mode to Auto
•FM Modulator to On
•FM Frequency to 88.1 MHz
•Audio Output Level to 70%
•Access to all skipped Channels (Locked channels remain locked)
•Memory Search On
•Memory Locations are erased
•Eastern Time Zone
•Daylight Savings Time Observed
•Auto Shutdown Off
•Sleep Mode Off
| 29 |
Starmate ST1 User Guide |
