through the available channels in each category to find the channel to which you want to listen.
When you have found the channel you wish to listen to, highlight the channel using the channel up and down buttons and press the select button to tune to the channel. The new channel will begin playing and the display will revert to the default display screen for the new channel.
To exit the channel list mode without changing to a different channel, press and hold the DISP button for 1½ seconds, until the default screen is displayed.
Selecting Channels Directly
A channel may be directly selected by entering the channel number using the 0 - 9 buttons on the Receiver.
To enter a channel number, momentarily press and release the select button. At the display prompt enter the three digit channel number.
001 Channel Name
Enter Channel
Artist# N
Category 12:00P A
Advanced Features
Channel Presets (BAND)
You can store up to 30 of your favorite channels as presets for quick recall access. The preset channels are stored in 3 bands, A, B, and C, each containing 10 channel presets, and are numbered 0 to 9. The 10 channel presets in each band are accessed by pressing the appropriate number (0 to 9) on the Receiver. A momentary press and release of the BAND button cycles through the 3 preset bands (A, B, and C).
Storing Channel Presets
To store a favorite channel as a preset, do the following:
1.Momentarily press and release the BAND button until the desired preset band, A, B, or C, is displayed in the lower right corner of the default display screen.
2.Tune the Receiver to the channel you wish to store as a preset. (See the section, Basic Operation for specific instructions for tuning to a channel.)
3.Press and hold for 1½ seconds the numbered
| 21 |
ST2 Starmate Replay User and Installation Guide |