Sirius Satellite Radio ST2 manual Factory Default

transmitters.

To display the Signal Indicator screen, do the following:

1.Use channel up and down buttons to highlight “Signal Indicator”, and press the select button.

Signal Indicator

SAT - +

TER - +

2.Two 10 segment horizontal bar graphs will be displayed with a “-“ sign to the left and a “+” sign to the right. SAT indicates the satellite signal strength while TER indicates the terrestrial

signal strength, if a terrestrial signal is available. To exit the Signal Indicator menu, press the MENU button.

Factory Default

The Factory Default option will restore most every feature of the Receiver to the original factory settings. The following is a list of all features affected by the Factory Default option:

•All Presets are cleared

•All Game Alerts are cleared

•Receiver set to Normal Tuning Mode

•Display brightness set to 50%

•Display Contrast set to 50%

•FM Transmitter set to On

•FM Frequency set to 88.1 MHz

•All S-Seek memory cleared

•Clock set to 12-Hour Format

•Time Zone set to Eastern Standard Time

•Daylight Savings Time set to Observed

•Auto Shutdown set to Off

•Sleep Mode set to Off

•Auto Select set to Off

•ProgramAlert cleared

Note that the Parental Control feature is not affected by the Factory Default option. If a code has been set for the Parental Control feature, the code will not be reset by the Factory Default feature, preventing someone from circumventing the Parental Control feature. Channels which have been locked will remain locked.

To activate the Factory Default feature, and restore

54

ST2 Starmate Replay User and Installation Guide