![Using Channel Presets](/images/new-backgrounds/15899/1589943x1.webp)
preset button in which you wish to store your favorite channel, until you hear a beep. The band and preset number will then be displayed in the lower right corner of the display screen to confirm that the channel has been stored.
001 Channel Name
Artist Name
Preset Stored
Song Title
Category 12:00P A1
Note: If the preset button already has a channel stored in it, the preset will be replaced by the newly stored channel.
Using Channel Presets
The active band of presets is displayed in the lower right corner of the default display screen, A, B or C. To change the active band, momentarily press and
and preset number will be displayed in the lower right corner of the default display screen.
001 Channel Name
Artist Name
Song Title
Category 12:00P A3
Searching for a Channel Preset (P.TUNE Mode)
To quickly search through all of your presets in the P.TUNE mode, do the following:
1.Press and hold the BAND button for approximately 1 second to enter the P.TUNE mode. “Preset Tuning Mode” will momentarily be displayed and the top left and lower right corners of the display will invert to indicate the Receiver is in the Preset Tune Mode.
release the BAND button to cycle between the preset bands.
The 10 preset channels in the active band can then be selected by momentarily pressing and releasing
001 Channel Name
Artist Name
Preset Tune Mode
Song Title
Category 12:00P A
001Channel Name
Artist Name
Song Title
Category 12:00P A1
the 0 through 9 buttons.
When you have chosen a preset channel, the band
2.Use the channel up and down buttons to move up or down through your channel presets and immediately tune to each channel. Channel
22
ST2 Starmate Replay User and Installation Guide