To exit the Jump Settings menu, press the MENU button.
JumpSet
To set the Jump button to a specific channel (other than a traffic channel) when pressed, do the following:
1.Use the channel up and down buttons to highlight the “JumpSet” option, and press the select button.
2.The following screen will be displayed:
Jump Setting
Tune to desired Ch.
press & hold the 
button
Use the channel up and down buttons to tune to the channel you want assigned to the Jump button. When the channel is tuned, press and hold the Jump button for 2 seconds until the following screen is displayed.
Jump Setting
Traffic: NONE
JumpSet
The channel selected is now assigned to the Jump button.
To exit the Jump settings menu, press the MENU button.
At any time while listening to a channel (other than a traffic channel), the channel may be assigned to the Jump button by simply pressing and holding the Jump button for 2 seconds.
Display Options
The Receiver’s display screen can be adjusted for brightness and contrast using the Display Options.
Display Options
Brightness
Contrast
Use the channel up and down buttons to highlight the “Brightness” or “Contrast” option, and press the select button.
42
ST2 Starmate Replay User and Installation Guide
