Smart Technologies 710.0026 Introduction, Overview, •Transmitter De-Activation after removal

INTRODUCTION

The SmarTire LF Initiator is a handheld tool designed to provoke data transmissions from SmarTire High Pressure Sensors. The tool can be used to assist the installer during:

•New Installations – programming sensor ID numbers & vehicle configuration into the receiver

•Sensor Replacement - programming new sensor ID numbers into the receiver

•Installation Verification (without moving vehicle)

•Transmitter De-Activation (after removal)

NOTE: The SmarTire LF Initiator is compatible with SmarTire’s low and high pressure commercial sensors ONLY. It is not compatible with the low pressure sensors used in SmarTire products for passenger vehicles, motorcycles, trailers and tow-behinds.

OVERVIEW

Transmission End

LED Light

Initiate Button

De-Energize Button

Learn Button

On / Off Switch

Battery Cover

Initiate: Press this button to make a sensor transmit its ID number, tire pressure data and tire temperature data. This function is used when confirming that sensors are installed in the correct wheel locations on a vehicle after system installation.

De-energize:Press this button to de-activate a sensor. This function should only be used when sensors are removed from a vehicle.

710.0026 R1.2 SmarTire LF Initiator Operating Instructions 3

REFERENCE ONLY