99-00964-20 A0 Appendix A: Remotely Managing Your Interactive Whiteboard System 41
Source Selection
Allows you to switch between input sources.
Command Response Powered Off
set input [target] input=[current] no
get input [current] input=[current] yes
Field Possible Values Description
target input =VGA1
=VGA2
=Composite
=S-Video
Allows you to select which application
you would like to switch to
current input VGA1
VGA2
Composite
S-Video
None
Indicates the current input selected
NOTE: The None value is a
non-selectable value that appears
when you enter a ‘get input’ command
while the projector is in idle mode.