Smart Technologies V280

70 | MOUNTING YOUR INTERACTIVE WHITEBOARD ON A FLOOR STAND

3. Secure the bottom cross-bar (F) to the uprights

(D and E) with two 1 1/2" (3.8 cm) button-head

screws (K). Use the included hex key to tighten

the screws.

NOTE

The square holes on the uprights (D and E)

must face outward.

4. Secure both the vertical frame parts (G)

to the bottom and top frame parts (H and J) with

two 1 1/2" (3.8 cm) button-head screws (K), as

illustrated. Ensure that the vertical frame parts

(G) are on the outside of the frame assembly,

and that both the angled, tabbed side of the top

frame part (J) and the center hole on the bottom

frame part (H) face outward. Use the included

hex key to tighten the screws.

5. Secure your interactive whiteboard support

bracket (L) to the center of the bottom frame

part (H) with a 1/2" (1.3 cm) button-head screw

(M), as illustrated. Use the included hex key

to tighten the screws.

6. With the help of another person, fit this frame

between the uprights of the support assembly

that you completed in step 3.

4×

8×