SMC CORPORATION
Wiring of cable for solenoid valve power supply and communication
Communication connector for DeviceNet
Terminal | Wire color | Connected to |
| |
V- | Black |
|
| |
CANL | Blue | Low side of communication cable |
|
|
FG | - | Ground / Shield |
|
|
CANH | White | High side of communication cable |
| |
V+ | Red | (+) side of power supply cable |
|
|
Power supply connector for solenoid valve | ||||
Terminal | Wire color | Connected to | ||
24V | - | (+) side of solenoid valve source supply | ||
0V | - |
CAUTION
•Before wiring, be sure to turn power supply off.
•Screw for connectors is M3. Tighten them properly by torque of 0.5 to 0.6 [N·m].
•SI unit isn’t available for monitoring of power supply for solenoid valve.
•Do not put cable specified by DeviceNet with/near high voltage line or strong electric line such as driving line.
- 7 -