SMC Networks PFMV5 Flow characteristic chart Reference, Mounting and Installation unit mm, Piping

Flow characteristic chart (Reference) Mounting and Installation (unit: mm)

		PFMV5(05/10/30)				Mount on direct		Mount on one side
	5.0
	4.5							Mounting screw
	4.0
voltage[V]								(M3 x 15L)
	3.5							L-type bracket
								(Tapped)
output	3.0
	2.5							Mounting screw
Analog	2.0
	1.5
	1.0					Mount on both sides
	0.5
	0.0						L-type bracket
	0%	20%	40%	60%	80%	100%
							(Through hole)
						Maximum
			Flow			rated flow
						L-type bracket
						(Tapped)	Mounting screw
							(M3 x 15L)
		PFMV5(05/10/30)F
	5.0
	4.5
	4.0					Thread tightening torque is 0.32	0.02N•m.
voltage[V]
	3.5					Manifold mount (using ZS-36-A		)
output	3.0
	2.5
Analog	2.0					(Tapped)		L-type bracket
	1.5					L-type bracket		(Through hole)
	1.0
	0.5
	0.0							Mounting screw
	-100%	-50%	0%		50%	100%
						Maximum
			Flow			rated flow
						Thread tightening torque is 0.32	0.02N•m.
						Depending on fittings, they interfere each other and not possible for mounting

Refer to catalog for details of flow characteristic. in series by using bracket.

Piping	Circuit
During installation of the flow sensor to the pipe, hold the body with specified
spanner	Circuit	Brown DC(+)
		Black	OUT (Analog output)
	Main	1kΩ	DC(-)
		Blue
			Load

Analog output : 1 to 5V

Output impedance : Approx. 1kΩ

Tightening torque to mount the fitting is 1 to 1.5N.m

12 to 24VDC

Recommended fitting list

PFMV5 series recommended fitting list

One-Touch fitting

•Male Connector (One-Touch Male Connector)/KQ2H04-M5

•Hexagon Socket head Male Connector/KQ2S04-M5

•Male Elbow/KQ2L04-M5

One-Touch mini fittings

•Male Connector/KJH04-M5

•Hexagon Socket head Male Connector/KJS04-M5

•Male Elbow/KJL04-M5

Miniature fitting

• Barb fittings for nylon tubing/M-5AN-4/M-5AN-6