BACK - | NEXT - Firmware Update Procedure |
Utility Configuration (Web-based)
The default IP address of the SMC2655W is 192.168.2.50. If you prefer to configure the AP via a web browser rather than the utility program, you can do so by opening your web browser and going to "http://192.168.2.50". You need to be sure that your computer is configured in the same subnet in order to access the Access Point's web management interface. For example, your machine's IP should be 192.168.2.x (where x is not equal to one (1) or fifty (50), but is less than 255).
Once you are able to access the AP, you will need to login by entering the default password. Type in "default" and then press [Login].
Figure 1.0
Once you are logged in, you will be able to view the firmware version, change the IP scheme, change the password and/or configure security options.
