SMC Networks warranty SMC2655W Installation Instructions, BACK - Equipment Checklist

BACK - Equipment Checklist NEXT - Utility Installation

SMC2655W: Installation Instructions

1)Site Location – Choose a location for your SMC2655W Wireless Access Point. Usually, the best location is at the center of your wireless coverage area, if possible within line-of-sight of all wireless devices.

2)Placement - Put the Access Point in a position that gives it maximum coverage. Normally, the higher you place the antenna, the better the performance.

3)Connect the Ethernet cable – The SMC2655W can be wired to an Ethernet network through an Ethernet device such as a hub or a switch using category 3, 4, or 5 UTP Ethernet cable and an RJ-45 connector.

4)Connect the power cable – Connect the power adapter cable to the 5 VDC power socket on the rear panel.

Warning: Use only the power adapter supplied with the SMC2655W.