ABOUT THE TIGERSWITCH 10/100
Status LEDs
The LEDs, which are located on the front panel for easy viewing, are shown below and described in the following table.
Figure 1-4. Port and System LEDs
Port and System Status LEDs
LED |
| Condition | Status |
|
|
|
|
Power |
| On | Switch is receiving power. |
|
|
|
|
|
| ||
|
|
| |
Link & |
| On | Port has established a valid network |
Activity |
|
| connection. |
|
|
|
|
|
| Yellow | Valid 10 Mbps connection. |
|
|
|
|
|
| Green | Valid 100 Mbps connection. |
|
|
|
|
|
| Flashing | Traffic is passing through the port. |
|
|
|
|
FDX |
| On | Port is operating at full duplex. |
|
|
|
|
HDX |
| Off | Port is operating at half duplex. |
|
|
|
|
Module Ports |
|
| |
|
|
| |
Link & |
| On | A module is installed in this slot. |
Activity |
|
|
|
| Yellow | Communications have been set to 1000 | |
|
| ||
|
|
| Mbps. |
|
|
|
|
|
| Flashing | Traffic is passing through the module. |
|
|
|
|
