COMPLIANCES
Safety Compliance
Warning: Fiber Optic Port Safety
When using a fiber optic port, never look at the transmit laser while it is powered on. Also, never look directly at the fiber TX port and fiber cable ends when they are powered on.
Avertissment: Ports pour fibres optiques - sécurité sur le plan optique
Ne regardez jamais le laser tant qu'il est sous tension. Ne regardez jamais directement le port TX (Transmission) à fibres optiques et les embouts de câbles à fibres optiques tant qu'ils sont sous tension.
Warnhinweis: Faseroptikanschlüsse - Optische Sicherheit
Niemals ein Übertragungslaser betrachten, während dieses eingeschaltet ist. Niemals direkt auf den
Underwriters Laboratories Compliance Statement
Important! Before making connections, make sure you have the correct cord set.
Check it (read the label on the cable) against the following:
Operating Voltage | Cord Set Specifications |
|
|
120 Volts | UL Listed/CSA Certified Cord Set |
|
|
| Minimum 18 AWG |
|
|
| Type SVT or SJT three conductor cord |
|
|
| Maximum length of 15 feet |
|
|
| Parallel blade, grounding type attachment plug |
| rated 15A, 125V |
|
|
240 Volts (Europe only) | Cord Set with |
| conductors with minimum diameter of 0.75 mm2 |
| |
|
|
| Male plug rated 10A, 250V |
|
|
The unit automatically matches the connected input voltage. Therefore, no additional adjustments are necessary when connecting it to any input voltage within the range marked on the rear panel.
