MAKING NETWORK CONNECTIONS
Figure 4-3. Making SC Port Connections
4.As a connection is made, check the Activity LED on the switch’s front panel for the corresponding module to be sure that the connection is valid.
Note: If you use the optional SC-ST Converter, be sure to connect the converter’s Tx (Rx) port to the Rx (Tx) port on the other device.
The 1000BASE-SX fiber optic ports operate at 1 Gbps full duplex, with auto-negotiation of flow control. The maximum length for fiber optic cable operating at Gigabit speed will depend on the fiber type as listed under “1000 Mbps Gigabit Ethernet Collision Domain” on page 2-5.
