I
NSTALLING
THE
M
ODULE
5
4. Remove the installed module or faceplate: Firmly pull on
the screws until the module is free of the swit ch. Carefully
slide the module straight out of the slot.
Keep the original faceplate for future use. If you should
remove the module, replace the faceplate to prevent dust and
debris from entering the unit and to maintain proper air flow.
5. Insert the new module into the switch: Holding the new
module with the text on the front panel upright, carefully slide
the module into the lower slot on the rear panel, and press
gently until it snaps into place. Be sure the new modu le’s front
panel is flush with the switch panel.
Slot2Slot1
Slot2Slot1
1000BASE-SXModule