S
ETTING
U
P
TCP/IP
TO
W
ORK
WITH
THE
W
IRELESS
B
ARRICADE
5-6
Windows 2000
1. Click the “Start” button and choose “Settings,” then click “Control
Panel.”
2. Double click the “Network and Dial-up Connections” icon, then
“Local Area Connection” icon, and press the “Properties” button in
the “General” tab.
3. Select the TCP/IP line that has been assigned to your network card in
the “Local Area Connection Properties” window.
4. Click the “Properties” button to set the TCP/IP protocol for the
Wireless Barricade.
5. You can dynamically assign TCP/IP address settings to a client, or you
can manually configure a client with address settings to meet your
specific network requirements. (Note that the default IP address of the
Wireless Barricade is 192.168.2.1.)