Integra RDC-7.1 Connecting a DVD Recorder or Digital VCR VIDEO, Audio Output Assign sub-menu

Connecting AV Components—Continued

Connecting a DVD Recorder or Digital VCR (VIDEO 1)

For USA and Canadian models, this type of connection is only possible if an option board that has an appropriate terminal is installed.

•When connecting a DVD recorder or digital VCR to the RDC-7.1, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to pages 30, 31 for correct connections.

•This section shows the connections example when you use the VIDEO 1 as an input. In this case, you do not need additional configurations. When connecting to other terminals within the same terminal section on the RDC-7.1, configure the audio input assignment in the Audio Assign sub-menu (See page 98), the video input assignment in the Video Assign sub-menu (See page 99), the audio output assignment in the Audio Output Assign sub-menu (See page 95), and the video output assignment in the Video Output Assign sub-menu (See page 96).

•You can change the display name for the input source to represent the actual connected device (See page 101).

•When you want to perform analog recording of the audio signal from the digital device, you have to make analog audio signal connections. Connect the audio output terminals on the digital device to the AUDIO IN terminals on the RDC-7.1 using analog audio cables (RCA/phono).

•For a model without a HDMI terminal, when you connect a DVD recorder or digital VCR to the COMPONENT ter-

minals, be sure to use the COMPONENT terminals to connect a TV or projector.

*For more information on the HDMI interface, see page 43.

*For more information on the i.LINK (AUDIO) interface, see page 40.

Example for connecting with the VIDEO 1 as input

Digital video recorder (DVD recorder, digital VCR)

When connecting to other audio terminals within the same terminal section, con- figure the audio input settings accordingly using the Audio Assign sub-menu (See page 98).

Audio Output		Video Output
AUDIO OUT	AUDIO OUT	S VIDEO	VIDEO	COMPONENT
DIGITAL	ANALOG
		OUT	OUT		OUT (RCA)
COAXIAL	R L			Y	PB	PR

When connecting to other video terminals within the same termi- nal section, configure the video input settings accordingly using the Video Assign sub-menu (See page 99).

A	B	C DIGITAL IN	D DIGITAL IN	E		- CH	F		AUDIO IN	G		H S VIDEO	VIDEO
						MULTI	R		L	R	L
		OPTICAL	COAXIAL	FR	FL	IN 1						IN	IN
		1	1				PH		4			1
				SUB		C
		2	2						5			2
									GND
				SR		SL	R	L
	“Net -Tune”	3	3				1		6			3
	is a trademark of
	Onkyo Corporation.
				SBR		SBL
		4	4				2		7			4
	ETHERNET	5	5				3		8			5
	(Net-Tune)
		6	6				1		9			6
		1	1				2		4			1
				DIGITAL IN
				( BALANCED )
		2	2	AES/EBU			3		5			2
			OUT				R	L	OUT	R	L		OUT
												S VIDEO	VIDEO

(ASSIGNABLE)

I	COMPONENT	J		K
	VIDEO
IN 1	IN 2	COMPONENT VIDEO		ANTENNA
		((HDHD/BNC/BNC))	IN
	Y		Y
	PB
			PB
	PR			FM
OUT 1	IN 3			75
	Y		PR
			OUT
	PB		Y
				AM
	PR
			PB
3
4			PR
OUT
VIDEO	S VIDEO

(ASSIGNABLE)

L

HDMI		RS232
IN 1
HDMI, the HDMI logo	REMOTE	12V
	CONTROL
is a trademark		TRIGGER
or registered		OUT
trademarks of HDMI		A
Licensing LLC.
		200mA MAX.
IN 2	B 100mA MAX.
		C
		100mA MAX.

D100mA MAX.

		E
		100mA MAX.
	MAIN
	ZONE 2
	ZONE 3	UPP
	OUT
	IN	OUT
		IR
(SINGLE)	AC INLET

When connecting to other audio ter- minals within the same terminal section, configure the audio output settings accordingly using the

Audio Output Assign sub-menu	AUDIO IN	R L	S VIDEO	VIDEO
	DIGITAL	AUDIO IN
(See page 95).			IN	IN
	COAXIAL	ANALOG
	Audio Input		Video Input

34

When connecting to other video terminals within the same termi- nal section, configure the video output settings accordingly using the Video Output Assign sub- menu (See page 96).