Integra RDC-7.1 instruction manual Remote Zone, Enjoying Movies and Music in a

Enjoying Movies and Music in the Remote Zone (Zone 2/3)—Continued

When Connecting the Power Amplifier (Zone 2 or Zone 3)

•You can enjoy a different source in a remote zone while a 7.1 channel source is being played in the main room.

•Adjust the volume level on the RDC-7.1 (not on the power amplifier).

Main Room

	Power amp
TV	RDC-7.1

Zone 2/Zone3

	R	L	OUT	OUT
				VIDEO
				TV
	IN
R	L		poweramp

1 Connect the power amplifier for Zone 2 or Zone 3 to the RDC-7.1.

Connect to any of the following terminals:

•AUDIO OUT 1-5

•DIGITAL OUT OPTICAL 1-2

•DIGITAL OUT COAXIAL 1-2

2	Connect the speakers for Zone 2 or Zone
	3 to the power amplifier.
3	Connect the video component for Zone 2
	or Zone 3 to any of the composite VIDEO

OUT 1-4 terminals.

4	Set the Setup menu.
	1.	On the Setup menu (See page 95), select
		“Speaker/Output Setup” → “Audio Output
		Assign,” and set the terminal to which the
		component is connected to “Zone 2 Out” or
		“Zone 3 Out.”
	2.	Then, set “Zone 2 Out” or “Zone 3 Out” in
		the Audio Output Assign sub-menu to “Pre
		Out (variable).”
	3.	Similarly, select “Speaker/Output Setup” →
		“Video Output Assign,” and set the terminal
		to which the component is connected to
		“Zone 2 Out” or “Zone 3 Out.”	Operations
Remote Zone
4.		Press the [Setup] button to close the menu.

Enjoying Movies and Music in a

•The sleep timer in the main room also works in Zone 2 and Zone 3. To make the sleep timer effective only in Zone 2 or Zone 3, set the sleep timer on the RDC-7.1 in the main room, and then put it into the standby status.

•Sounds and pictures that can be output to Zone 2 and Zone 3 are as follows:

	From Input	ZONE	REC/	To Output Terminal
	Terminal	2	ZONE
			3
		✔	✔	AUDIO OUT 1-5
	ETHERNET,
	PH,			DIGITAL OUT OPTICAL 1-2
Input	AUDIO IN 1-9
				DIGITAL OUT COAXIAL 1-2
Audio
	DIGITAL IN	✔*2	✔*1	AUDIO OUT 1-5
	OPTICAL 1-6,	✔	✔	DIGITAL OUT OPTICAL 1-2
	DIGITAL IN
	COAXIAL 1-6
		✔	✔	DIGITAL OUT COAXIAL 1-2
Input	VIDEO IN 1-6,	✔*3	✔*3	VIDEO OUT 1-4
	S VIDEO IN 1-
Video	6, COMPO-			S VIDEO OUT 1-4
	NENT VIDEO
	IN 1-6			COMPONENT VIDEO OUT
*1	Only PCM output
*2	Possible for 2 channel downmix signal.

*3 In the case of COMPONENT VIDEO IN, possible if the HDMI slot is inserted.

Columns covered by “ \ ” indicate that no setting related to the column is specified for Zone 2 Out or Zone 3 Out in “Audio Output Assign” or “Video Output Assign.”

69