Integra RDC-7.1 Using Macros, Press the scroll wheel, to select AMP mode, Press the Play, player

Using the Remote Controller with Other Components—Continued

Using Macros

With the Macro function you can program the remote controller to perform a sequence of actions with one press of a button. For example, normally you need to perform the following actions to use a CD player that’s connected to the RDC-7.1:

1.Press the scroll wheel, (to select AMP mode).

2.Press the [On] button (to turn on the RDC-7.1).

3.Roll the scroll wheel to select CD (to select the CD remote controller mode and the CD input source).

4. Press the Play [	] button (to start the CD
player).

With the Macro function you can program the remote controller to do all of this with one press of a button.

Making Macros

You can make up to eight macros, and each macro can perform up to eight actions.

1	Press and hold the [Custom] but-
	ton for more than three seconds.
Custom
	The remote controller enters Custom
	mode.
2	Roll the scroll wheel to select

5	On the remote controller, press the
	buttons whose actions you want to
	program into the macro in the
	order you want them performed.
	To program the CD example in the left
	column into a macro: press the scroll
	wheel, press the [On] button, roll the
	scroll wheel to select CD, press the
	scroll wheel, and then press the Play
	[ ] button.
	Actions are numbered from 1 to 8.
		Macro #1 selected
		8 actions learned
	After each button is pressed, “SET” fol-
	lowed by “KEY” is displayed.
	To add an action that selects an input
	source for the main room, Zone, 2 or
	Zone 3, press the [Input], [Zone 2], or
	[Zone 3] button, respectively, roll the
	scroll wheel to select the input source,
	and then press the scroll wheel.
6	When you’ve finished, press the
	Macro button.

Remote Controller

“MACRO,” and then press the

scroll wheel.

Macro

After the following appears on the dis- play, the display returns to normal.

Using the

3	Roll the scroll wheel to select
	“EDIT,” and then press the scroll
	wheel.

4	Roll the scroll wheel to select a
	macro, and then press the scroll
	wheel.

Macros are numbered from 1 to 8.

Macro #1 selected

Action #1

137