Integra RDC-7.1 TV Logic, Listening Modes for Listeners Using Headphones, Dolby Headphone

Using the Listening Modes—Continued

TV Logic

This mode is suitable for television programs broadcast from studios. You may feel as if you are sitting in a tele- vision studio. All of the surround sounds are enhanced, and conversations are output clearly.

Listening Modes for Listeners Using

Headphones

Dolby Headphone

This mode makes headphones reproduce dynamic sur- round sound effects like 5.1 channel speakers. The lis- tening mode used before putting on headphones is applied to the headphones. However, the following lis- tening modes will be decoded as follows:

•The Dolby VS or Stereo mode sources will be decoded in the Dolby Headphone mode.

•The source decoded in the 7.1ch surround format will be decoded in the 5.1ch surround format.

•The DTS 96/24 mode source will be decoded in the DTS format.

Listening modes when the Dolby Headphone is set to “Off”:

Direct

When the listening mode was Direct before putting on headphones, this mode is applied. Effects are the same as the Direct mode indicated previously.

Pure Audio

When the listening mode was Pure Audio before putting on headphones, this mode is applied. Effects are the same as the Pure Audio indicated previously.

Mono

When the listening mode was Mono, Mono Movie or Full Mono before putting on headphones, this mode is applied. Effects are the same as the Mono mode indi- cated previously.

This mode is also applied when you listen to the monau- ral source in the Dolby VS listening mode before put- ting on headphones.

Stereo

When the listening mode was other than Direct, Pure Audio, Mono, Mono Movie or Full Mono before put- ting on headphones, this mode is applied. Effects are the same as the Stereo mode indicated previously.

Multiplex

When the listening mode was Multiplex before putting on headphones, this mode is applied.

60