Integra RDC-7.1 Connecting the Power/Basic Operations, Turning on the Power, Hint

Connecting the Power/Basic Operations

•Before you plug in the RDC-7.1, confirm that all connections have been made properly.

•Turning on the power may cause a momentary power surge, which might interfere with other electrical equipment on the same circuit, such as computers. If this happens, use a wall outlet on a different circuit.

•The RDC-7.1 is shipped with the main power (Power) switch in the on position ( On ). When the power cord is plugged in for the first time, the RDC-7.1 will automatically enter the standby state and the [Standby] indicator will light (same condition after step 2 below on the left column).

Standby/On

Standby/On

Power

On O f f

Input source buttons

Standby indicator

Master Volume

Master Volume

On

Standby

Pure Audio

Zone 2 (GRN )

Rec/Zone 3 (RED)

DVD

Video 1

Video 2

Video 3

Video 4

Video 5

Video 6

Video 7

Tape 1

Tape 2

Tuner

Phono

C D

Net Audio

Open/Close

Zone 2 Rec/Zone 3	Off	Display	DSP	Dimmer	Tuning	Preset	Tuning Mode Memory	Setup	Enter	Exit
							Clear			Phones

AV Controller RDC-7.1

To wall outlet

Power

Turning on the Power

1	Power	Plug the power cord into an AC
	On O f f	wall outlet.

Press the [Power] switch to set the

RDC-7.1 to standby state.

Standby The [Standby] indicator will light up.

Operating on the RDC-7.1

1			Select an input source.
			Press the input source button.
DVD	Video 1	Video 2	Video 3
			*You cannot listen to a source in main
Video 4	Video 5	Video 6	Video 7 room A, and to another source in main
Tape 1	Tape 2	Tuner	room B.
Phono	C D	Net Audio

2

Standby/On

Standby

Turn off

Press the [Standby/On] button to turn on the RDC-7.1.

The display will light up and the [Standby] indicator will turn off.

If you press the [Standby/On] button again, the RDC-7.1 returns to the standby state.

2	Start playing the device selected.
	When playing a picture device such as a
	DVD player, you need to switch input to a
	monitor such as a TV set.
	Some picture-playing devices such as a
	DVD-type game machine may also

Note:

Any components connected via will also be turned on when the remote controller’s [On] button is pressed.

52

	require setting of sound output. Refer to
	the manual of the device connected.
3	Adjust the volume level with the
	[Master Volume] dial.

Master Volume You can adjust the volume level in the range from –∞, –81.5 dB to 18.0 dB (when Relative is selected in the Volume Setup sub-menu).

Hint:

The RDC-7.1 is a product for users to enjoy home theater, so it is equipped with a wide range of volume levels.

Please fine tune the volume level according to your preferences.