Integra RDC-7.1 Connecting and Setup, Connect the speakers for Zone 2 or Zone, OUT 1-4terminals

Enjoying Movies and Music in the Remote Zone (Zone 2/3)

You can connect speakers and amplifiers for the remote zone, and enjoy different sources in a remote zone (Zone 2 or Zone 3).

There are two ways to enjoy in a remote zone:

Connecting and Setup

When Connecting the Pre-main Amplifier or Receiver (Zone 2 or Zone 3)

•You can enjoy a different source in a remote zone while a 7.1 channel source is being played in the main room.

•Adjust the volume level on the pre-main amplifier or receiver in the remote zone.

Main Room

Power amp

RDC-7.1

TV

Zone 2/Zone3

	R	L	OUT	OUT
				VIDEO
				TV
	IN		Receiver/
R	L
		Pre-main amplifier

1 Connect the pre-main amplifier or receiver for Zone 2 or Zone 3 to the RDC-7.1.

Connect to any of the following terminals:

•AUDIO OUT 1-5 Default:

Analog 4 (AUDIO OUT 4): Zone 2 Out

Analog 5 (AUDIO OUT 5): Zone 3 Out

•DIGITAL OUT OPTICAL 1-2

•DIGITAL OUT COAXIAL 1-2

2	Connect the speakers for Zone 2 or Zone
	3 to the pre-main amplifier or receiver.
3	Connect the video component for Zone 2
	or Zone 3 to any of the composite VIDEO
	OUT 1-4 terminals.
4	Set the Setup menu.

1.On the Setup menu (See page 95), select “Speaker/Output Setup” → “Audio Output Assign,” and set the terminal to which the component is connected to “Zone 2 Out” or “Zone 3 Out.”

2.Then, set “Zone 2 Out” or “Zone 3 Out” in the Audio Output Assign sub-menu to “Line Out (fixed).”

3.Similarly, select “Speaker/Output Setup” → “Video Output Assign,” and set the terminal to which the component is connected to “Zone 2 Out” or “Zone 3 Out.”

4.Press the [Setup] button to close the menu.

68