Integra RDC-7.1 Listening Mode Setup—Continued, c. Re-EQ, d. Front Speaker, e. Center Speaker

Listening Mode Setup—Continued

• When the “(Speaker A) Surr Back” is set to “Bi-Amp for Front” or “Not Used” in the Speaker Configuration sub-menu, this option will not be displayed.

Dolby EX: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Digital EX mode. PLIIx Movie (Default): Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Movie mode.

•When you set the (Speaker A) Surr Back setting to “Main A 1ch (SBL)” in the Speaker Configuration sub-menu, you cannot select “PLIIx Movie.”

PLIIx Music: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Music mode.

NEO:6: Plays a 5.1ch source as a 6.1 or higher channel source using the DTS NEO:6NEO:6 mode.

Off: Plays an original 5.1ch source as it is.

c. Re-EQ

This option allows you to configure whether the Re-EQ effect is applied or not. Use this effect when you do not want to overemphasize the treble sound.

Off (Default): The effect is not applied.

On: Adjusts the soundtrack in which the treble is overemphasized, so that the sound is optimized for home theater.

d. Front Speaker

This option configures the front speakers to use when playing the source in the AAC listening mode. Select the speakers you want to use. This setting can be made when the “(Speaker B) Front L/R” is set to “Main A” in the Speaker Configuration sub-menu.

A (Default): Outputs the source from the front speakers configured to “Speaker A.”

B:Outputs the source from the front speakers configured to “Speaker B.”

A+B: Outputs the source from the front speakers configured to “Speaker A” and “Speaker B.” Note that this option is not available when the front speakers are in Bi-amp configuration.

e. Center Speaker

This option configures the center speaker to use when playing the source in the AAC listening mode. Select the speaker you want to use. This setting can be made when the “(Speaker B) Center” is set to “Main A” in the Speaker Configuration sub-menu.

A (Default): Outputs the source from the center speaker configured to “Speaker A.”

B:Outputs the source from the center speaker configured to “Speaker B.”

A+B: Outputs the source from the center speakers configured to “Speaker A” and “Speaker B.”

f. Surr L/R Sp

This option configures the surround speakers to use when playing the source in the AAC listening mode.

112

Select the speakers you want to use. This setting can be made when the “(Speaker B) Surr L/R” is set to “Main A” in the Speaker Configuration sub-menu.

A (Default): Outputs the source from the surround speakers configured to “Speaker A.”

B:Outputs the source from the surround speakers configured to “Speaker B.”

A+B: Outputs the source from the surround speakers configured to “Speaker A” and “Speaker B.”

g. Surr Bk Speaker

This option configures the surround back speakers to use when playing the source in the AAC listening mode. Select the speakers you want to use. This setting can be made when the “(Speaker B) Surr Back” is set to “Main A” in the Speaker Configuration sub-menu. However, when the “(Speaker A) Surr Back” is set to “Bi-Amp for Front” or “Not Used,” this setting will not be displayed.

•When the settings for “(Speaker A) Surr Back” and “(Speaker B) Surr Back” in the Speaker

Configuration sub-menu differ, the available options will be “A” and “B.”

A (Default): Outputs the source from the surround back speakers configured to “Speaker A.”

B:Outputs the source from the surround back speakers configured to “Speaker B.”

A+B: Outputs the source from the surround back speakers configured to “Speaker A” and “Speaker B.”

h. Subwoofer

This option configures the subwoofer to use when playing the source in the AAC listening mode. Select the terminal to which the subwoofer you want to use is connected. This setting can be made when the “(Speaker A) Subwoofer” is set to an option other than “Not Used” in the Speaker Configuration sub-menu. However, when the “(Speaker B) Subwoofer” is set to an option other than “Main A” in the Speaker Configuration sub-menu, the available options will be “A” or “Not Used.”

A (Default): Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT A terminal.

B:Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT B terminal. A+B: Outputs the source from the subwoofers connected to the SUBWOOFER PRE OUT A and SUBWOOFER PRE OUT B terminals.

Not Used: No subwoofers are used for playback.