109, Dolby Digital Setup Sub-menu, Late Night

Listening Mode Setup—Continued

g. Surr Bk Speaker

This option conﬁgures the surround back speakers to use when the RDC-7.1 plays a Super Audio CD. Select the speakers you want to use. This setting can be made when the “(Speaker B) Surr Back” is set to “Main A” in the Speaker Conﬁguration sub-menu. However, when the “(Speaker A) Surr Back” is set to “Bi-Amp for Front” or “Not Used,” this setting will not be displayed.

• When the settings for “(Speaker A) Surr Back” and “(Speaker B) Surr Back” in the Speaker Conﬁguration sub-menu differ, the available options will be “A” and “B.”

A (Default): Outputs the source from the surround back speakers conﬁgured to “Speaker A.”

B:Outputs the source from the surround back speakers conﬁgured to “Speaker B.”

A+B: Outputs the source from the surround back speakers conﬁgured to “Speaker A” and “Speaker B.”

h. Subwoofer

This option conﬁgures the subwoofer to use when the RDC-7.1 plays a Super Audio CD. Select the terminal to which the subwoofer you want to use is connected. This setting can be made when the “(Speaker A)

Subwoofer” is set to an option other than “Not Used” in the Speaker Conﬁguration sub-menu. However, when the “(Speaker B) Subwoofer” is set to an option other than “Main A” in the Speaker Conﬁguration sub-menu, the available options will be “A” or “Not Used.”

A (Default): Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT A terminal.

B:Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT B terminal. A+B: Outputs the source from the subwoofers connected to the SUBWOOFER PRE OUT A and SUBWOOFER PRE OUT B terminals.

Not Used: No subwoofers are used for playback.

Dolby Digital Setup Sub-menu

This sub-menu allows you to conﬁgure the audio effect and playback options when you play a source in the Dolby Digital listening mode.

a. LFE Level

This option allows you to set the bass level for the Dolby Digital listening mode. The LFE level setting made here will be applied to all of the Dolby Digital input signals. The available settings are –∞dB, –20 dB, –10 dB, and 0 dB. The option defaults to “0.” This option can also be set for Zone 2.

b. Late Night

This option allows you to set how the Late Night function works (See page 57). The setting you select here will be applied to all of the Dolby Digital input signals. Note that the Late Night setting will not be

retained and will return to “Off” after the RDC-7.1 enters the standby state. This option can also be set for Zone 2.

Off: Disables the Late Night function.

Low: Narrows the volume range.

High: Narrows the volume range more than the “Low” setting.

	c. Dolby EX
	This option conﬁgures the Dolby EX effect when
	playing the source in the Dolby Digital listening mode.
	Auto: Automatically plays a source using the Dolby EX
	mode when the source contains the Dolby Digital EX
	identiﬁcation signal. When this signal is not contained,
	the setting of “SB Mode (5ch)” is applied.
	Manual: The setting of “SB Mode (5ch)” is applied
	regardless of the Dolby Digital EX identiﬁcation signal.
	d. SB Mode (5ch)

	This option allows you to select the enhancement mode
	for playback when you play a 5.1ch source as a 6.1 or		Menu
	higher channel source through the RDC-7.1. The		Menu
	higher channel source through the RDC-7.1. The
	surround back setting you select here will be applied to		Setup
	the Dolby Digital input signal “*/2.”		Setup
	the Dolby Digital input signal “*/2.”
	• When the “(Speaker A) Surr Back” is set to “Bi-Amp
	for Front” or “Not Used” in the Speaker
	Conﬁguration sub-menu, this option will not be
	Conﬁguration sub-menu, this option will not be
	displayed.
	Dolby EX: Plays a 5.1ch source as a 6.1 or higher
	channel source using the Dolby Digital EX mode.
	PLIIx Movie (Default): Plays a 5.1ch source as a 6.1
	or higher channel source using the Dolby Pro Logic IIx
	Movie mode.

•When you set the (Speaker A) Surr Back setting to “Main A 1ch (SBL)” in the Speaker Conﬁguration sub-menu, you cannot select “PLIIx Movie.”

PLIIx Music: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Music mode.

NEO:6: Plays a 5.1ch source as a 6.1 or higher channel source using the DTS NEO:6 mode.

Off: Plays an original 5.1ch source as it is.

e. Re-EQ

This option allows you to conﬁgure whether the Re-EQ effect is applied or not. Use this effect when you do not want to overemphasize the treble sound.

Off (Default): The effect is not applied.

On: Adjusts the soundtrack in which the treble is overemphasized, so that the sound is optimized for home theater.

Integra RDC-7.1 instruction manual 109, Dolby Digital Setup Sub-menu, Late Night, Dolby EX

Models: RDC-7.1