Integra RDC-7.1 i.LINKIEEE1394:DVD-AudioInput Setup Sub-menu, a. LFE Level, b. SB Mode 5ch

Listening Mode Setup—Continued

i.LINK(IEEE1394):DVD-Audio Input Setup Sub-menu

This sub-menu allows you to configure the audio effect and playback options when you play DVD-Audio that is input from the i.LINK(AUDIO) interface.

This sub-menu appears when the i.LINK(AUDIO) terminal board [A] is inserted.

a. LFE Level

This option allows you to set the bass level for the i.LINK(IEEE1394):DVD-Audio listening mode. The LFE level setting made here will be applied to all of the i.LINK(IEEE1394):DVD-Audio input signals. The available settings are –∞dB, –20 dB, –10 dB, and 0 dB. The option defaults to “0.”

b. SB Mode (5ch)

Selects the enhancement mode for playback when you play a 5.1ch source as a 6.1 or higher channel source through the RDC-7.1. The surround back setting you select here will be applied to the i.LINK(IEEE1394):DVD-Audio input signal “*/2.”

•When the “(Speaker A) Surr Back” is set to “Bi-Amp for Front” or “Not Used” in the Speaker Configuration

sub-menu, this option will not be displayed. Dolby EX: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Digital EX mode. PLIIx Movie: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Movie mode.

•When you set the (Speaker A) Surr Back setting to “Main A 1ch (SBL)” in the Speaker Configuration sub-menu, you cannot select “PLIIx Movie.”

PLIIx Music: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Music mode.

NEO:6: Plays a 5.1ch source as a 6.1 or higher channel source using the DTS NEO:6 mode.

Off (Default): Plays an original 5.1ch source as it is.

c. Re-EQ

This option allows you to configure whether the Re-EQ effect is applied or not. Use this effect when you do not want to overemphasize the treble sound.

Off (Default): The effect is not applied.

On: Adjusts the soundtrack in which the treble is overemphasized, so that the sound is optimized for home theater.

d. Front Speaker

This option configures the front speakers to use when the RDC-7.1 plays DVD-Audio. Select the speakers you want to use. This setting can be made when the “(Speaker B) Front L/R” is set to “Main A” in the Speaker Configuration sub-menu.

A (Default): Outputs the source from the front speakers configured to “Speaker A.”

B:Outputs the source from the front speakers configured to “Speaker B.”

A+B: Outputs the source from the front speakers configured to “Speaker A” and “Speaker B.” Note that this option is not available when the front speakers are in Bi-amp configuration.

e. Center Speaker

This option configures the center speaker to use when the RDC-7.1 plays DVD-Audio. Select the speaker you want to use. This setting can be made when the “(Speaker B) Center” is set to “Main A” in the Speaker Configuration sub-menu.

A (Default): Outputs the source from the center speaker configured to “Speaker A.”

B:Outputs the source from the center speaker configured to “Speaker B.”

A+B: Outputs the source from the center speakers configured to “Speaker A” and “Speaker B.”

f. Surr L/R Sp

This option configures the surround speakers to use	Menu
when the RDC-7.1 plays DVD-Audio. Select the
speakers you want to use. This setting can be made	Setup
when the “(Speaker B) Surr L/R” is set to “Main A” in
the Speaker Configuration sub-menu.
A (Default): Outputs the source from the surround
speakers configured to “Speaker A.”

B:Outputs the source from the surround speakers configured to “Speaker B.”

A+B: Outputs the source from the surround speakers configured to “Speaker A” and “Speaker B.”

g.Surr Bk Speaker

This option configures the surround back speakers to use when the RDC-7.1 plays DVD-Audio. Select the speakers you want to use. This setting can be made when the “(Speaker B) Surr Back” is set to “Main A” in the Speaker Configuration sub-menu. However, when the “(Speaker A) Surr Back” is set to “Bi-Amp for Front” or “Not Used,” this setting will not be displayed.

• When the settings for “(Speaker A) Surr Back” and “(Speaker B) Surr Back” in the Speaker Configuration sub-menu differ, the available options will be “A” and “B.”

A (Default): Outputs the source from the surround back speakers configured to “Speaker A.”

B:Outputs the source from the surround back speakers configured to “Speaker B.”

A+B: Outputs the source from the surround back speakers configured to “Speaker A” and “Speaker B.”

107