Integra RDC-7.1 Connecting a VCR VIDEO 2, VIDEO, Connecting AV Components—Continued

Connecting AV Components—Continued

Connecting a VCR (VIDEO 2, VIDEO 3)

For USA and Canadian models, this type of connection is only possible if an option board that has an appropriate terminal is installed.

•When connecting a VCR to the RDC-7.1, make connections for video and audio signals. Before making connec- tions, refer to pages 30, 31 for correct connections.

•This section shows the connection example when you use the VIDEO 2 or VIDEO 3 as an input. In this case, you do not need additional configurations. When connecting to other terminals within the same terminal section on the RDC-7.1, configure the audio input assignment in the Audio Assign sub-menu (See page 98), the video input assign- ment in the Video Assign sub-menu (See page 99), the audio output assignment in the Audio Output Assign menu (See page 95), and the video output assignment in the Video Output Assign menu (See page 96).

•You can change the display name for the input source to represent the actual connected device (See page 101).

•For a model without a HDMI terminal, when you connect a VCR to the COMPONENT terminals, be sure to use the

COMPONENT terminals to connect a TV or projector.

*For more information on the HDMI interface, see page 43.

*For more information on the i.LINK (AUDIO) interface, see page 40.

Example for connecting with the VIDEO 2 as input

VCR

When connecting to other	Audio Output		Video Output
audio terminals within the	AUDIO OUT	AUDIO OUT	S VIDEO	VIDEO	COMPONENT
same terminal section, config-	DIGITAL	ANALOG
			OUT	OUT	VIDEO (RCA)
ure the audio input settings	COAXIAL	R L			Y	PB PR
accordingly using the Audio
Assign sub-menu (See page
98).
For digital
VCR

When connecting to other video terminals within the same terminal section, con- figure the video input settings accordingly using the Video Assign sub-menu (See page 99).

Installation and Connections

A

B

C DIGITAL IN

D DIGITAL IN

E

MULTI

F

AUDIO IN

G

H S VIDEO

VIDEO

I

COMPONENT

J

K

- CH

VIDEO

OPTICAL

COAXIAL

FR

FL IN 1

R

L

R

L

IN

IN

IN 1

IN 2

COMPONENT VIDEO

PH

4

((HDHD//BNCBNC))

IN

1

1

1

Y

Y

L

ANTENNAHDMI

RS232

			SUB	C
	2	2					5		2			PB
							GND
			SR	SL	R	L						PB
“Net -Tune”	3	3			1		6		3			PR	FM
is a trademark of
Onkyo Corporation.			SBR	SBL							OUT 1	IN 3	75
					2		7					PR
	4	4							4			Y
												OUT
ETHERNET	5	5			3		8		5			PB
(Net-Tune)												Y	AM
	6	6			1		9		6			PR
												PB
	1	1			2		4		1		3
			DIGITAL IN
			( BALANCED )									PR
	2	2	AES/EBU		3		5		2		4
		OUT			R	L	OUT R	L		OUT	OUT
									S VIDEO	VIDEO	VIDEO	S VIDEO
			(ASSIGNABLE)									(ASSIGNABLE)

IN 1

HDMI, the HDMI logo	REMOTE	12V
	CONTROL
is a trademark		TRIGGER
or registered		OUT
trademarks of HDMI		A
Licensing LLC.
		200mA MAX.
IN 2	B 100mA MAX.
		C
		100mA MAX.

D100mA MAX.

		E
		100mA MAX.
	MAIN
	ZONE 2
	ZONE 3	UPP
	OUT
	IN	OUT
		IR
(SINGLE)	AC INLET

When connecting to other audio terminals			When connecting to other video ter-
within the same terminal section, configure			minals within the same terminal
the audio output settings accordingly using	R L		section, configure the video output
the Audio Output Assign sub-menu (See page			settings accordingly using the Video
	AUDIO IN	S VIDEO
95).	ANALOG	IN	Output Assign sub-menu (See page
	Audio Input	Video Input	96).

35