Integra RDC-7.1 instruction manual Installation, Speaker Placement—Continued, and Connections

Speaker Placement—Continued

Main room A: 7.1 ch speaker system and the two additional front speakers connected through the bi- amp connection (when you want to use either the 7.1 ch speakers or the additional front speakers according to the source)

	FL	FL	C	FR	FR
SW

Main room A

SL			SR
	SBL	SBR

1-1.Speaker Config

=====================

Speaker A

a.Front L/R	:Main A
b.Center	:Main A
c.Surr L/R	:Main A
d.Surr Back
:Main A	2ch
e.Subwoofer	:Main A
Speaker B
f.Front L/R	:Main A
g.Center	:Not Used
h.Surr L/R	:Not Used
i.Surr Back
:Bi-Amp	for Front
j.Subwoofer	:Not Used

3-3.Stereo

=====================

a.Re-EQ/Academy :Off

b.Front Speaker :B

c.Subwoofer :A

Here is an example of the stereo listening mode.

•Set all the zone parameters for speaker system [A] to “Main A.”

•For speaker system [B], set the front speaker parameters to “Main A” and the surround back speaker parameters to “Bi-Amp for Front” (For details on connections, see page 27).

•When you want to use the front speakers of speaker system [B] for specific sources, select the source and set the

front speaker parameters to “B” in the listening mode setup menu.

*When using the bi-amp connections, the two speaker systems cannot be used to output simultaneously.

Main room A: 5.1 ch speaker system including the front speakers connected through the bi-amp connections

and Connections

FL C FR

SW

Main room A

SL

SR

1-1.Speaker Config

=====================

Speaker A

a.Front L/R		:Main A
b.Center		:Main	A
c.Surr L/R		:Main	A
d.Surr Back
	:Bi-Amp for Front

e.Subwoofer :Main A Speaker B

f.Front L/R :Not Used

g.Center	:Not Used
h.Surr L/R	:Not Used
i.Surr Back

:Not Used j.Subwoofer :Not Used

Installation

•For speaker system [A], set the surround back speaker parameters to “Bi-Amp for Front” and all the other speaker parameters to “Main A” (For details on speaker connections, see page 27).

•For speaker system [B], set the speaker parameters to “Not Used.”

*When using the bi-amp connections, you cannot use Zone 2 since the surround back channel is used for the front speakers of main room A.

23