Connecting Monitors such as TV or Projector

Connecting AV Components—Continued

Connecting Monitors such as TV or Projector

For USA and Canadian models, this type of connection is only possible if an option board that has an appropriate terminal is installed.

•This section describes the connections for displaying the video source or the operating information of the RDC-7.1 on a monitor device such as a TV or projector. Before making a connection, check the terminal types on the monitor device and acquire the necessary cables by referring to page 31.

•The RDC-7.1 incorporates a video converter, which allows you to enjoy the video source even when the connections between the playback device and the RDC-7.1 and between the RDC-7.1 and the monitors are different. When your TV or monitor has various types of input terminals, use the connection with which you can get the best video quality (For a model with no HDMI terminal, note that the input signal from the COMPONENT terminal will be output only to the COMPONENT terminal).

•The VIDEO OUT 4 and S VIDEO OUT 4 terminals can be used only for Main room A.

•When you enjoy the video source in the remote zone (Zone 2 or Zone 3), the TV or monitor should be connected to

the VIDEO 1, VIDEO 2, or VIDEO 3 terminal.

*For more information on the HDMI interface, see page 43.

Monitor device such as TV and projector for Main room A

Make a connection using any of the terminals below.

*1 When connecting to the other S VIDEO OUT terminal, conﬁgure the video output settings accordingly using the Video Output Assign sub-menu (See page 96).

*2 When connecting to the other VIDEO OUT terminal, conﬁgure the video output settings accordingly using the Video Output Assign sub-menu (See page 96).