Direct, Pure Audio Setup Sub-menu, A. Front Speaker

Listening Mode Setup—Continued

A (Default): Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT A terminal.

B:Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT B terminal. A+B: Outputs the source from the subwoofers connected to the SUBWOOFER PRE OUT A and SUBWOOFER PRE OUT B terminals.

Not Used: No subwoofers are used for playback.

This option defaults to “A.”

Direct, Pure Audio Setup Sub-menu

This sub-menu allows you to conﬁgure the audio effect and playback options when you play a source in the Direct or Pure Audio listening mode.

a. Front Speaker

This option conﬁgures the front speakers to use when playing the source in the Direct or Pure Audio listening mode. Select the speakers you want to use. This setting can be made when the “(Speaker B) Front L/R” is set to “Main A” in the Speaker Conﬁguration sub-menu.

A (Default): Outputs the source from the front speakers conﬁgured to “Speaker A.”

B:Outputs the source from the front speakers conﬁgured to “Speaker B.”

A+B: Outputs the source from the front speakers conﬁgured to “Speaker A” and “Speaker B.” Note that this option is not available when the front speakers are in Bi-amp conﬁguration.

b. Center Speaker

This option conﬁgures the center speaker to use when playing the source in the Direct or Pure Audio listening mode. Select the speaker you want to use. This setting can be made when the “(Speaker B) Center” is set to “Main A” in the Speaker Conﬁguration sub-menu.

A (Default): Outputs the source from the center speaker conﬁgured to “Speaker A.”

B:Outputs the source from the center speaker conﬁgured to “Speaker B.”

A+B: Outputs the source from the center speakers conﬁgured to “Speaker A” and “Speaker B.”

c. Surr L/R Sp

This option conﬁgures the surround speakers to use when playing the source in the Direct or Pure Audio listening mode. Select the speakers you want to use.

This setting can be made when the “(Speaker B) Surr L/ R” is set to “Main A” in the Speaker Conﬁguration sub- menu.

A (Default): Outputs the source from the surround speakers conﬁgured to “Speaker A.”

B:Outputs the source from the surround speakers conﬁgured to “Speaker B.”

A+B: Outputs the source from the surround speakers conﬁgured to “Speaker A” and “Speaker B.”

d. Surr Bk Speaker

This option conﬁgures the surround back speakers to use when playing the source in the Direct or Pure Audio listening mode. Select the speakers you want to use. This setting can be made when the “(Speaker B) Surr Back” is set to “Main A” in the Speaker Conﬁguration sub-menu. However, when the “(Speaker A) Surr Back” is set to “Bi-Amp for Front” or “Not Used,” this setting will not be displayed.

• When the settings for “(Speaker A) Surr Back” and “(Speaker B) Surr Back” in the Speaker Conﬁguration sub-menu differ, the available options will be “A” and “B.”

A (Default): Outputs the source from the surround back speakers conﬁgured to “Speaker A.”

B:Outputs the source from the surround back speakers conﬁgured to “Speaker B.”

A+B: Outputs the source from the surround back speakers conﬁgured to “Speaker A” and “Speaker B.”

e. Subwoofer

This option conﬁgures the subwoofer to use when playing the source in the Direct or Pure Audio listening mode. Select the terminal to which the subwoofer you want to use is connected. This setting can be made when the “(Speaker A) Subwoofer” is set to an option other than “Not Used” in the Speaker Conﬁguration sub-menu. However, when the “(Speaker B) Subwoofer” is set to an option other than “Main A” in the Speaker Conﬁguration sub-menu, the available options will be “A” or “Not Used.”

A (Default): Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT A terminal.

Not Used: No subwoofers are used for playback.

Multichannel Input Setup Sub-menu

This sub-menu allows you to conﬁgure the audio effect and playback options when you play an analog multichannel source such as DVD-Audio and Super Audio CD.

This sub-menu appears when the multichannel terminal board [E] is inserted.

a. SB Mode (5ch)

This option selects the enhancement mode for playback when you play a 5.1ch analog multichannel source as a

6.1or higher channel source through the RDC-7.1. The surround back setting you select here will be applied to all of the multichannel input signals.

• This option will not appear when the Surr Back Channel setting in the Audio Assign sub-menu is set to “SBL/SBR (7.1ch).”

Setup Menu

105

Integra RDC-7.1 Direct, Pure Audio Setup Sub-menu, Multichannel Input Setup Sub-menu, Setup Menu

Models: RDC-7.1