Integra RDC-7.1 Listening to RDS Broadcasts European models only, Displaying Radio Text RT

Listening to RDS Broadcasts (European models only)—Continued

Tuner

AV Controller RDC-7.1

RT/PTY/TP Enter /

Displaying Radio Text (RT)

If the station you are currently tuned into is broadcasting RT signals, they will be displayed in the front display on the RDC-7.1. If the station does not, this function will be ignored.

RT/PTY/TP	To display the radio text, press the
	[RT/PTY/TP] button once.

•If the current station you are listening to is not an RDS station, only the frequency of the station will appear.

•If “Waiting” appears on the display, more time is required to receive the RT information. When the information is received, the characters will scroll across the front display.

•If “No Text Data” appears on the display, RT informa- tion is not available.

•The display shows the frequency for 3 seconds and returns to program service name.

Performing a PTY Scan

1	Press the [Tuner] input source
Tuner	button and select the FM input
	source.
2	Press the [RT/PTY/TP] button
RT/PTY/TP	twice.
	The current program type appears on the
	display.
3	Using the [ ] and [ ] cursor
	buttons, select the PTY program

type you desire.

4		Press the [Enter] button dial.
		The RDC-7.1 will scan until it reaches a
	Enter	station of the program type you selected.
		It will then stop briefly at that station
		before continuing on until it reaches the
		next station. Pressing the [Enter] button
		dial stops the PTY scan at that point. If
		you press the [RT/PTY/TP] while
		“NONE” is displayed, “PTY ?” will
		appear. In this case, return to step 3.
5		Press the [Enter] button dial when
		it reaches the station that you want	Operations
	Enter	to listen to.

“Not Found” will appear when no RDS signal is being received from the station.

Performing a TP Scan

1	Press the [Tuner] input source
	button.
	Tuner

2	Press the [RT/PTY/TP] button
	three times.
RT/PTY/TP

“[TP]” will appear if the current station is broadcasting TP signals. This station will periodically broadcast traffic information. To find a different station, proceed to the next step. Also, if “TP” is displayed, proceed to the next step.

3		Press the [Enter] button.
		The RDC-7.1 will scan until it reaches a
	Enter	station broadcasting traffic information. If
		“Not Found” appears on the display, a TP
		station cannot be located.

65