Integra RDC-7.1 About Network Configuration, To the LAN side port Room, LAN port Ethernet, etc

Connecting Net Audio – Other than USA, Canada, and Australian models –

—Continued

Notes:

•To use Internet radio with the RDC-7.1, your broad- band Internet connection needs to be up and running and able to access the Web. Please consult your ISP if you have any problems with your Internet connection.

•The RDC-7.1 uses DHCP and AutoIP to configure its network settings automatically. If you want to configure these settings manually, see page 122.

•The RDC-7.1 does not support PPPoE settings, so if you have a PPPoE-type Internet connection, you must use a PPPoE compatible router.

•Depending on your ISP, you may need to specify a proxy server to use Internet radio. If your PC is con- figured to use a proxy server, use the same settings (See page 122).

Networking Your RDC-7.1

To connect the RDC-7.1 to your Ethernet network, plug one end of a CAT5 Ethernet cable into the ETHERNET (Net- Tune) port, and plug the other end into a LAN port on your router or switch.

The following diagram shows how you can connect the RDC-7.1 to your Ethernet network. Here it is connected to a LAN port on the router, which has a 4-port 100Base-TX switch built-in.

You can connect any number of RDC-7.1s to the network, and Net-Tune Central can serve up to three clients simulta- neously, so you can enjoy Net-Tune in three separate rooms simultaneously. The following diagram shows a Net-Tune network with two RDC-7.1s.

Operations

RDC-7.1

OPTICAL COAXIAL R L R L IN IN IN 1 IN 2 RS232

PH				IN
			Y	Y
					IN 1
			P
R	L			P
			P		12V
					TRIGGER
					OUT
			IN 3
			Y	P	IN 2
ETHERNET			P
				Y	AM
			P
				P
DIGITAL IN
				P	UJJ
R	L	R	L

			IR
			AC INLET
L	L	L	L
R	R	R	R
	PRE OUT A	PRE OUT B	MODEL NO. RDC-7.1

Internet radio	ETHERNET
	(Net-Tune)

Modem

To the WAN side

Router

To the LAN side port

To the LAN side port

PC

Internet radio PC

Modem

To the WAN side

To the LAN side port

Router To the LAN side port

To the LAN side port

Room 1 Room 2

LAN port/

Ethernet, etc.

You can install Net-Tune central on several networked computers and use the RDC-7.1’s Select Server setting to select the server whose music database you want to access (See page 99).

About Network Configuration

When you use a broadband router with the DHCP function enabled, the network settings will be configured automati- cally. In this case, you do not have to make any settings using the setup menu. If you disabled the DHCP function on the broadband router, configure the network settings manually referring to page 122.

77