Integra RDC-7.1 Inner Panel, Index Parts and Facilities—Continued, A Zone 2 button

Index Parts and Facilities—Continued

Inner Panel

Caution:

The front door of the AV Controller is motorized. Use the [Open/Close] button to open or close the door. Manually opening or closing the door, or moving the AV Controller while holding the door, will cause the door to malfunc- tion or break.

USA, Canadian, and Australian models

Zone 2

Rec/Zone 3

Off

Display

DSP

Dimmer

Tuning

Preset

Tuning Mode Memory

Setup

Enter

Exit

Clear

Phones

AV Controller

RDC-7.1

European models

Zone 2

Rec/Zone 3

Off

Display

DSP

RT/PTY/TP

Tuning

Preset

Tuning Mode Memory

Setup

Enter

Exit

Clear

Phones

AV Controller

RDC-7.1

A Zone 2 button [70] B Rec/Zone 3 button [70, 72]

Press this button to enter the Zone 2 configuration mode. If you want to configure the Zone 2 settings such as standby/on setting, input source setting, listening mode, volume adjustment, audio selector mode, and display settings, press this button first.

12

Press the [Rec/Zone 3] button to output to a recording component for recording purposes or enter the Zone 3 mode. After pressing the [Rec/ Zone 3] button, press one of the input source selector buttons within 3 seconds to select the component. When one is selected, the indicator above that button will light in red. To record from the same input source that you are using (that is selected for the main zone), press the [Rec/Zone 3] button twice in succession.

Note:

Recording and Zone 3 operations use the same circuit and therefore cannot be used at the same time.