Selecting the Listening Mode, Operating on the RDC-7.1

Using the Listening Modes—Continued

Selecting the Listening Mode

The RDC-7.1 provides various listening modes.

Note:

The available modes depend on the input signal you selected.

Input source buttons

AV Controller RDC-7.1

DSP

3	Press the scroll wheel, and then press the
	listening mode button you want to select.
	Pure A button: To switch the listening mode to
	“Pure Audio.” When you select “PURE AUDIO,”
	the video signal is interrupted (resulting in a
	blacked-out screen), and the [Pure Audio] indica-
	tor lights up.
	Direct button: To switch the listening mode to
	“Direct.”
	Stereo button: To switch the listening mode to
	“Stereo.”
	Surround button: To switch the listening mode
	to the surround mode.
	• When 5 channel signals are input, every time

you press the button, the listening mode	Operations
changes “DolbyEX” → “PLIIx Movie
(Default)” → “PLIIx Music” → “NEO:6” →

Scroll wheel Mode

THX Surround

Pure A

Direct

“Off” → “DolbyEX,” and so on.

• When 2 channel signals are input, every time

you press the button, the listening mode

changes “PLIIx Movie (Default)” → “PLIIx

Music” → “PLIIx Game” → “NEO:6 Cinema”

→ “NEO:6 Music” → “PLIIx Movie

(Default),” and so on.

THX button: To switch the listening mode to

“THX.”

• When Dolby Digital multichannel (*/2) signals

are input, you can switch to any of the

following decode modes. Every time you press

the button, the listening mode changes “THX

Cinema” → “SurroundEX” → “Ultra2 Cinema

(Default)” → “MusicMode”→ “Games Mode”

→ “THX Cinema,” and so on (See page 115).

DSP/DSP buttons: Every time you press

the buttons, you can switch to any of the listening

modes according to the input signals.

1	Press the input source button.

2	Start playback on the device you selected
	for input.

3	Use the [ ] DSP [ ] buttons to select a
	listening mode.

Operating with the Remote Controller


1	Roll the scroll wheel to select a device for play-
	back.
	Perform this operation when neither the [Mode]
	button nor the [Input] button lights. If any button
	lights, press it to turn it off.
	Rolling the scroll wheel lights both buttons, and
	switches the input source and the mode at the
	same time.

2	Start playback on the device you selected
	for input.