Integra RDC-7.1 Front Panel Display, AUTO indicator, RDS indicator European models only

Index Parts and Facilities—Continued

0ANTENNA (FM/AM)

(Only available as option for the USA model.) These jacks are for connecting the FM indoor antenna and the AM loop antenna that are supplied with the RDC-7.1.

AHDMI IN/OUT

(Only available as option for the USA model.)

This interface can transfer digital audio and video signals simultaneously. The terminal can be connected to the HDMI terminal on components such as DVD player, set top box (B tuner), projector, and digital TV.

B REMOTE CONTROL

This jack is for connecting other IntegraRESEARCH/ Onkyo components equipped with the same terminal. The audio connection cables must also be connected.

CRS 232

This port is for connecting the RDC-7.1 to home automation and external controllers.

D12V TRIGGER OUT

These connectors are used to connect to the 12V TRIGGER IN terminal of a component. Available

connectors are one with maximum current capacity of 200 mA and four with 100 mA.

EIR IN (for all models), IR OUT (other than USA and Canadian models)

These connectors are for connecting the remote sensor of a multiroom kit (sold separately).

The connectors are provided for main room, Zone 2, and Zone 3.

FPRE OUT A/B (RCA type)

These jacks are for connecting power amplifiers. If the jacks on your power amplifier are RCA type jacks, connect them here. Both of the PRE OUT A and PRE OUT B sections offer all the terminals for the front left and right, center, surround, surround back and subwoofer channels.

GPRE OUT A (Balanced type)

These jacks are for connecting power amplifiers. If the jacks on your power amplifier are XLR (balanced) type jacks, connect them here.

HAC INLET

This connector is for connecting the supplied power cord.

Getting Started

Front Panel Display

AListening mode or input format indicators

One of these indicators lights to show the format of the current input source. In addition, one of the listening mode indicators lights to indicate the current listening mode.

BMultifunction display

During normal operation, shows the current input source. When the FM or AM input is selected, shows the frequency and preset number. When the [Display] button is pressed, shows the listening mode and input source format.

CAudio input signal path indicators

Shows from which terminal the audio input signal is coming.

DMAIN A/B indicators

Indicates which room is currently in use.

ESLEEP indicator

Lights when the sleep timer is turned on.

FTuning indicators

AUTO indicator

Lights when receiving FM broadcasts in the stereo mode. Turns off when placed into the monaural mode.

RDS indicator (European models only)

Lights when an RDS station is being received.

TUNED indicator

Lights when a radio station is being received.

MEMORY indicator

Lights when the [Memory] button is pressed to preset a radio station.

FM STEREO indicator

Lights when an FM broadcast station is being received in stereo. Turns off when placed into the monaural mode.

GProgram format display

When the input source is DVD video, Super Audio CD, or compressed digital audio signal such as Dolby Digital and DTS, the channels corresponding to the input source light.

HVolume display

Shows the volume level.

IVideo input signal path indicators

Shows from which terminal the video input signal is coming.

15