Integra RDC-7.1 OSD Map ZONE, Setup Menu—Continued, The Zone 2 settings shown on this

Setup Menu—Continued

OSD Map (ZONE 2)

The Zone 2 settings shown on this		Reference
page can be made when you		pages
	0.Hardware Setup
perform the following settings in the
	=====================
“MAIN A” setup menu.
	1.TV Format Setup		91

•Under the “Speaker/Output Setup → Audio (Video) Output Assign” menu, when you select the output terminal setting to “Zone 2 Out.”

	1.Input Setup	100
	==Input:XXXXXXXXX====
	1.Listening Mode Preset						102
	2.Delay
								103
Zone 2 Setup	2.Listening Mode Setup					104
=====================	=====================
0.Hardware Setup	1.Mono Setup
1.Input Setup	2.Multiplex Setup
	3.Stereo Setup
2.Listening Mode Setup
	4.Dolby Digital Setup
3.Audio Adjust					109
4.Preference	5.DTS Setup
	6.AAC Setup
	7.Dolby Virtual
	Speaker Setup			110
				111
			117
	3.Audio Adjust
	=====================
	1.Tone Control						119

4.Preference

=====================

1.Volume Setup

2.OSD Setup 120

3.OSD Position

Setup Menu

89