CONFIGURING CLIENT PC
TCP/IP Configuration
To access the Internet through the Barricade, you must configure the network settings of the computers on your LAN to use the same IP subnet as the Barricade. The default IP settings for the Barricade are:
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
Note: These settings can be changed to fit your network requirements, but you must first configure at least one computer to access the Barricade’s web configuration interface in order to make the required changes. (See “Configuring the Barricade” on page
Windows 98/Me
You may find that the instructions in this section do not exactly match your version of Windows. This is because these steps and screen shots were created from Windows 98. Windows Millennium Edition is similar, but not identical, to Windows 98.
1.On the Windows desktop,
click Start/Settings/Control Panel.
