CONFIGURING THE BARRICADE
Routing Table
Parameter | Description |
Flags | Indicates the route status: |
| C = Direct connection on the same subnet. |
| S = Static route. |
| R = RIP (Routing Information Protocol) assigned route. |
| I = ICMP (Internet Control Message Protocol) Redirect route. |
Network | Destination IP address. |
Address |
|
Netmask | The subnetwork associated with the destination. |
| This is a template that identifies the address bits in the destination |
| address used for routing to specific subnets. Each bit that corresponds |
| to a “1” is part of the subnet mask number; each bit that corresponds |
| to “0” is part of the host number. |
Gateway | The IP address of the router at the next hop to which frames are |
| forwarded. |
