SMC Networks SMC8624T manual Ethernet Cabling, 1. RJ-45 Connections

Models: SMC8624T

1 80
Download 80 pages 51.33 Kb
Page 38
Image 38
Ethernet Cabling

INSTALLING THE SWITCH

Ethernet Cabling

To ensure proper operation when installing the switch into a network, make sure that the current cables are suitable for 10BASE-T, 100BASE-TX or 1000BASE-T operation. Check the following criteria against the current installation of your network:

Cable type: Unshielded twisted pair (UTP) or shielded twisted pair (STP) cables with RJ-45 connectors; Category 3 or better for 10BASE-T, Category 5 or better for 100BASE-TX, and Category 5e or better for 1000BASE-T.

Protection from radio frequency interference emissions

Electrical surge suppression

Separation of electrical wires (switch related or other) and electromagnetic fields from data based network wiring

Safe connections with no damaged cables, connectors or shields

RJ-45 Connector

Figure 3-1. RJ-45 Connections

3-2

Page 38
Image 38
SMC Networks SMC8624T manual Ethernet Cabling, 1. RJ-45 Connections