CONFIGURING THE SWITCH
Web Configuration
Displaying Status Overview
You can easily identify the system by displaying the device name, location and contact information.
Field Attributes
System Information
•System Name – Name assigned to the switch system.
•Number of Ports – Number of
•Hardware Version – Hardware version of the main board.
•Code Version – Version number of the code.
•Serial Number – The serial number of the switch.
Address Information
•Management VLAN – ID of the configured VLAN (this is set to 1 and cannot be changed) all ports on the unit are members of VLAN 1. The management station must always be attached to a port on VLAN 1.
•IP Address – Address of the VLAN to which the management station is attached. (Note that the management station must always be on VLAN 1. Valid IP addresses consist of four decimal numbers, 0 to 255, separated by periods.
•Subnet Mask – This mask identifies the host address bits used for routing to specific subnets. (Default: 255.255.255.0)
•Gateway IP Address – IP address of the gateway router between the switch and management stations that exist on other network segments. (Default: 0.0.0.0)
•MAC Address – The physical layer address of the switch.
Port Information
•Type – Indicates the port type.
•Link Status – Indicates if the link is Up or Down.
