WEB CONFIGURATION
•Flow Control – Allows flow control to be enabled or disabled. When the box is checked, flow control is enabled.
•Ports – Indicates which ports belong to the trunk.
Web – Click TRUNKS, Settings.
Figure 5-21 Trunk Configuration
Trunk Rate Limit
This page allows you to change the maximum input and output data rate for each each trunk on the switch.
Field Attributes
•Trunk – Indicates trunk identification.
•Trunk Speed – Indicates the trunk speed.
•Enable Input Rate Limiting - Click to select the box to enable the Input Rate Limiting function.
•Input Limit – Enter the desired limit. (percentage of port speed)
•Enable Output Rate Limiting – Click to select the box to enable the Output Rate Limiting function.
•Output Limit – Enter the desired limit. (percentage of port speed)
•Ports – Indicates which ports belong to the trunk.
