
Quick
Installation Guide
EZConnect™
802.11g Wireless USB Adapter
Before you Begin...
Thank you for purchasing the SMC EZConnect™ 802.11g Wireless USB Adapter.
If you wish to connect to a wireless network that is secured (with password), please first gather the security type and keys (password) set up on your wireless router or access point before you proceed with the following steps.
Q1
Insert the SMC EZ Installation CD into the
drive on your desktop or laptop.
Q2
The SMC installation wizard will pop up.
Click “Install/Remove Driver and Utility”.
If the Software Installation warning appears as below, click “Continue Anyway”.
Click Finish to exit the Wizard. You have now finished installing the drivers for
Q3
Icon on the desktop:
From the Start menu: Click “Start”→ “Programs”
→ “SMCWUSB-N2 802.11n Wireless Utility”→
“SMC Wireless Utility”
Q4
Click on the “Profile Management” tab and
Name your default profile and client computer (optional). Enter the SSID name of the network you wish to connect to and click OK.
Q5
Connecting to a secured wireless network
Note: Please make sure you have the correct security type (WPA/WPA2 or WEP) and password for the wireless network you wish to connect to.
If you have lost this information, you might need to log into your wireless router/AP where the informa- tion is stored.
Click on the Security tab on the Profile Management screen.
If the Security Type set up on your wireless router/AP is
-Set the Security Option to “WPA/WPA2 Passphrase” and click Configure
-Enter the password (8 characters minimum) and click OK
If the Security Type set up on your wireless router/AP is WEP:
-Set the Security Option to
-Set the Key Entry to ASCII Text
-Enter the password and click OK
Note: A
Q6
The SMC Adapter will now connect to your wireless router or access point. Enjoy the wireless connection you have just set up.
Note: For WPS configuration and other questions, refer to the SMC User Manual on the CD.