Smeg 43CT1 manual Starting, Loading garments into the drum, Spin dry selection, Button

Models: 43CT1 43CT

1 14
Download 14 pages 4.03 Kb
Page 5
Image 5

ENGLISH

– Spin dry selection

000

000

button

 

This button enables you to select a more gentle spin speed. This is especially recommended for washing garments which have been worn and washed a great deal or any garments whose materials have special finishes

If you then go on to a drying programme, you should bear in mind that the this will take longer and will consequently work out more expensive.

Crease guard button

When you select this button the program- me will stop during the last rinse, leaving the garments floating in the water inside the drum, thereby preventing any creases from forming. You can then either press the button once more to finish the programme or select the drainage programme only to drain away the water should you want to avoid the spin dry programme.

Starting

Your washing machine can carry out a was- hing programme, a drying programme or a washing and drying programme (consecu- tive drying).

Here is an explanation of each of these.

- Selecting a wash-only programme

1.Select the number of the programme that you want with the Programme Selector Control (6).

2.The Drying Time Selector Control (7) must be set at STOP.

3.Select the wash temperature you want with the Temperature Selector Control

(8).

4.Press whichever of the additional func- tion buttons that you may want.

5.Press the START button.

-Selecting a combined washing and drying programme

The process is the same as a wash-only programme except that you set the Drying

Time Selector Control (7) at the temperatu- re you want.

- Selecting a dry only programme

1.Turn the Programme Selector Control

(6)to letter corresponding to the type of drying programme you want (S or D)

2.With the Drying Time Selector Control select the drying time that you want.

3.Press the START button.

Loading garments into the drum

Opening the loading door

To open the loading door, pull the handle 3 (Fig. 1) outwards.

Loading the drum

We recommend you to follow these steps when loading garments into the drum:

Make sure that there is nothing in any of the pockets.

Do not put any garments in which are folded or crumpled up.

Put the garments into the drum one by one so that they do not become tan- gled. Make sure that you put the sma- llest items at the back of the drum.

Do not press them down.

Remember that there are different recommended weights of loads for dif- ferent programmes.

When washing towels and similar items, try to avoid washing them on their own, always put them in with other garments.

Once you have loaded everything into the drum, press the loading door until it is clo- sed tight. Make sure that nothing gets trap- ped between the loading door and the rub- ber seal.

63

Page 5
Image 5
Smeg 43CT1 manual Starting, Loading garments into the drum, Spin dry selection, Button